Engineered vs Solid Hardwood: What Is the Difference?
Both are real wood on top. What is underneath decides where each one works.
Planning a project? See our engineered hardwood installation page.
The quick comparison
| Solid hardwood | Engineered hardwood | |
|---|---|---|
| What it is | One solid piece of wood | Real wood top on a plywood or composite core |
| Over concrete | Not usually | Yes, glued or floated |
| Humidity changes | Moves more, can gap or cup | More stable |
| Refinishing | Many times | Depends on wear layer |
| Looks | Real wood | Real wood |
How they are made
Solid hardwood is cut from one piece of wood, usually about three quarters of an inch thick. Engineered hardwood has a top layer of real wood glued to layers of plywood or a stable core. You cannot tell them apart once they are installed.
Slabs and subfloors
Solid hardwood is nailed to a wood subfloor. It is not usually installed directly on concrete. Engineered hardwood can be glued down or floated over a slab once the slab is tested for moisture and made flat. That makes engineered the go-to choice for many newer homes in our area that are built on slabs.
Our hot summers and dry winters
Wood grows in humid weather and shrinks in dry weather. Solid boards move more, so you may see small gaps in winter. Engineered boards move less because the core layers fight against the movement.
Refinishing down the road
Solid hardwood can be sanded and refinished several times over its life. Engineered hardwood depends on its wear layer. A thick top layer can be refinished once or more. A thin one may only take a light recoat. Ask for the wear layer thickness before you buy.
Which one should you pick?
Pick solid hardwood if you have a wood subfloor, plan to stay for decades and want the most refinishes. Pick engineered if you have a slab, want wide planks, or want a floor that stays stable through the seasons. We check your subfloor at the free estimate and tell you what will work.