Water-Damaged Hardwood: Repair, Refinish or Replace?
Fast action saves boards. Here is what to look for and what to do.
Short answer: Dry the area, fix the leak and get the floor checked fast. Light stains and small cupping can often be sanded out after the wood dries. Black stains, soft spots and boards that stay cupped usually need to be replaced and blended in.
Planning a project? See our hardwood floor refinishing page.
First 48 hours
- Stop the water source
- Remove rugs and wipe up standing water
- Run fans and a dehumidifier
- Do not sand or refinish while the wood is still wet
- Take photos for insurance
How bad is it?
- White haze: often only the finish, may buff out
- Dark or black stains: water reached the wood
- Cupped edges: wood swelled with moisture
- Soft or spongy spots: the subfloor may be damaged
Repair and blend
Damaged boards are cut out and new boards of the same species are woven in. Then the whole room is sanded and finished so old and new match.
When to replace
If damage covers a large area, the subfloor is soft, or engineered boards have delaminated, replacing that section or the whole floor is often the better choice.